冷再生機器主要用于舊瀝青路面的升級改造，即基層冷再生。還可用于公路、城市、道路、廣場、碼頭、停車場等工程的基層、底基層穩定土現場就地拌和作業。

The cold regeneration machine is mainly used for the upgrading and reconstruction of the old asphalt pavement, that is, the cold regeneration of the base course. It can also be used for on-site mixing of base and subbase stabilized soil in highway, city, road, square, wharf, parking lot and other projects.

舊路面改造時，冷再生機租賃廠家建議先按一定比例預灑骨料和添加劑，然后冷再生機頂推水車，與冷再生機自身帶的噴灑系統聯合工作，給銑刨轉子銑削拌和的骨料添加適量的水，其水量是可控制的。

During the reconstruction of the old pavement, the leasing manufacturer of the cold recycling machine suggested that the aggregates and additives should be pre-sprinkled in a certain proportion, and then the cold recycling machine should push the water truck to work together with the spray system of the cold recycling machine itself to add an appropriate amount of water to the aggregates milled and mixed by the milling rotor, and the water volume is controllable.

冷再生銑拌后的再生材料經過平地機整平，再由壓路機將路面壓實。視交通載荷的不同，再生層上可以作表面處理，或攤鋪瀝青面層或攤鋪水泥混凝土面層。

The recycled material after cold recycling milling is leveled by a grader and then compacted by a roller. Depending on the traffic load, surface treatment can be carried out on the recycled layer, or asphalt pavement or cement concrete pavement can be paved.

特點：

characteristic:

1、行車驅動和銑拌裝置的驅動均為全液壓閉式傳動；

1. The driving of the crane and the milling and mixing device are fully hydraulic closed transmission;

2、行走速度和銑拌轉子轉速均可以無極調速；

2. The traveling speed and milling rotor speed can be adjusted steplessly;

3、前后雙橋驅動，全液壓轉向；

3. Front and rear double axle drive, full hydraulic steering;

4、銑拌轉子的提升和下降，尾門的開啟和關閉均為電磁閥組操縱；

4. The lifting and lowering of the milling rotor and the opening and closing of the tailgate are controlled by the solenoid valve group;

5、駕駛室采用密封式，帶空調設備，大大地改善了駕駛員的工作環境；

5. The cab is sealed with air conditioning equipment, which greatly improves the driver's working environment;

6、本機前后輪驅動輪胎選用；

6. The front and rear wheel drive tyres of the machine are selected;

7、使用本機進行冷再生作業成本低，，施工速度快、工期短，對交通影響小、干擾少。

7. Using this machine for cold regeneration has low cost, environmental protection and energy conservation, fast construction speed, short construction period, small impact on traffic and little interference.

冷再生機器的用途作業流程以及特點相關內容就講解到這里了，您有怎樣的疑惑或者需求就來我們網站http://www.xinhezhong.cn進行咨詢吧！

The purpose, operation process and characteristics of the cold recycling machine will be explained here. If you have any doubts or needs, please come to our website http://www.xinhezhong.cn Consult!